..:: KOKSA-Community ::..

Mauer NW4
https://www.youtube.com/watch?v=zxE_dK4 ... 2CeJ6BUsAQ
Mauer red line GM(Guard Millenium)
https://www.youtube.com/watch?v=NmZd6yq ... 2CeJ6BUsAQ
Mauer red line G
https://www.youtube.com/watch?v=b06NWlf ... 2CeJ6BUsAQ

BKS 33SL
https://www.youtube.com/watch?v=og2shkj ... 2CeJ6BUsAQ
BKS
https://www.youtube.com/watch?v=k_96LpL ... 2CeJ6BUsAQ
CES
https://www.youtube.com/watch?v=7sHlgC0 ... 2CeJ6BUsAQ
DOM IX 10 KG
https://www.youtube.com/watch?v=UbhFqKH ... 2CeJ6BUsAQ

No BKS Detect3 ?

Part 1 show the Serie 33SL ?,
(i can't see the Detect3 Cuts in the Key)
After turn 2 a Clock was Blocking from the Sidebar (SL).

Part 2 show the BKS Serie 88

I have showed the key on first video.There are 3 cuts

Yes, thats right. But this 3 Cuts works only with the SL (Sidebar).
The Detect3 Cuts have smaller Size, and more to the Front located.

here i show a Detect3 Key:
http://www.koksa.org/viewtopic.php?f=46 ... ct3#p99010

A Detect3 Zylinder can optional have the SL Sidebar.

Then,which model is my lock Detect 3 or 33SL?

Take a look to the other Side of the Key.
If the Key only have this 3 Cuts, you show this in Video, then it's a 33SL
But i think the EXXXXX Profil ist not a Detect3 Pofile.

Note:
alle Detect3 Keys (after about ca. 2010) have the Detect3 Cuts.
But no all Zylinder have the optional in German "Zahnwelle" inside.
It's a Option and cost more

SelfLockmaster hat geschrieben:Part 1 show the Serie 33SL ?,

This shown Cylinder is NOT a "Detect3", it is a "TandemE-SL" .....
and
"Detect-E -SL" AND "TandemE - SL " AND also "Cascade SL" are known as "33SL"
33 means that the cylinder has normal pins and normal bited key and a protectet keyway ...
SL means it has a Sidebar (SperrLeiste)

The Detect3 has smaler MIllings in the area of the KeyTip .... the Detec3-Series is made WITH the "SL-Sidebar" so you have a key wit the big Side-Millings and small Side-Millings on the tip ... and the "SL-Sidebar" is not passive, it is a little bit active, so you have to set one of the levers into the key-Way ...

and the oter is a "Series 88 PZ" which are the standard-keyway from BKS (Like the Yale No.8-Keyway)

And You have made a Video about a GEGE-pExtra, but this is a "Standart-Keyway" from GEGE, the name of it is perhaps "AP1000" or "E-Profil", I'am not 100% sure ...
but it is no "pExtra", therefore i'm sure .

And the CES is something like a "RE5" or a "VA5" ... based of the proteckted "KB5-Keyways" for Masterkeying ... but Your Cylinder is not a part of a Key-System (i belive)

Greetings to bulgaria, Christian

but fine Works.

Thank you very much Cristian for the information.I will change all information for GeGe ,BKS ,CES .
Greetings from Bulgaria

Bulgaro hat geschrieben:Greetings from Bulgaria

Welcome !

Where do you come from ?
Sofia, Varna, Burgas, Plovdiv, Dobritsch . . . ?