Seite 1 von 1

Trap Pins Experiment

Verfasst: 20. Nov 2014 20:24
von Bulgaro
vcvIOMijL94

Re: Trap Pins Experiment

Verfasst: 22. Nov 2014 13:44
von decoder
Using (strong) tinfoil typically works. Not the very thin one because that will just break into tiny little pieces when you have it in the lock. I used some of the self-adhesive tinfoil that is thicker, and I think I folded it once more. Then you insert it and use a hook to push it down on the pins, it will then form a key for these pins. Just hold it down then and try to turn, should work. I managed to turn my lock even a few times without repicking (Mila Evolution, which has the same design as the GTV ones). For the GTVs, I only had one, and that one broke because it seemed like in one of the slots there was no pin but something shorter so the spring reached into the core. I will have to disassemble it to figure that out.

Re: Trap Pins Experiment

Verfasst: 22. Nov 2014 16:50
von Bulgaro
decoder hat geschrieben:Using (strong) tinfoil typically works. Not the very thin one because that will just break into tiny little pieces when you have it in the lock. I used some of the self-adhesive tinfoil that is thicker, and I think I folded it once more. Then you insert it and use a hook to push it down on the pins, it will then form a key for these pins. Just hold it down then and try to turn, should work. I managed to turn my lock even a few times without repicking (Mila Evolution, which has the same design as the GTV ones). For the GTVs, I only had one, and that one broke because it seemed like in one of the slots there was no pin but something shorter so the spring reached into the core. I will have to disassemble it to figure that out.
Thank you very much .Now i trying to pick Mila Evolution(this lock is harder than GTV).I will try your method and will make video(this night may be)